Simple Telephone Selection and Installation

• Two wire hookup for most applications

Simple Programming

• Programmable features can be conveniently set or modified:
• On-site at the time of installation
• Off-site before the installation
• Remotely from any touch-tone telephone, anywhere
• Interactive, voice prompted guidance for each programming step ensures easy, accurate, and complete programming, even for the first time user.
• Non-volatile memory using EEPROM technology allows programming of emergency telephone numbers and voice announcements months in advance of installation or telephone line activation without risk of memory loss.
• Built-in keypad allows programmable features to be conveniently set or modified without extra parts or tools.

100% ADA Code Compliant Features

• Voice activated location announcer with 10 second automatic and 16 second manual messages can be recorded to give the location of the emergency in case occupants cannot confirm the emergency verbally. The answering party can replay these messages simply by touch-tone.
• Five number autodialer will sequentially dial each of the programmed numbers if there is no answer or it gets a "busy" signal.
• Hands-free operation with a lighted push-button which can be flashed to alert occupants that help is on the way.
• Braille plates with raised lettering for ADA compliance.
• On-time can be set for 1 to 99 minutes, or disabled for unlimited on-time. Automatically shuts-off when the called party hangs up, or can be shut off by touch-tone.
• FCC, IC and ETL (UL and CSA equivalent) approved.

Operation

1. A single press of the push-button activates the unit, and lights the visual indicator.
2. The K-Phone ET401 dials the programmed emergency telephone number(s) automatically. If the number called is busy or there is no answer, the unit will cycle through the programmed emergency telephone numbers, making up to twelve dialing attempts.
3. When the called party answers, the Voice Announcement automatically plays the recorded message; then two-way communication begins. The visual indicator can also be made to flash by the called party to indicate that help is on the way.
4. When the call is completed, the K-Phone will shut off automatically (or can be remotely shut off).
5. K-Phones can be called back to establish two-way communication from any telephone at any time.

Specifications:

Dimensions:

Sentry
9 1/2"H x 4 3/4"W x 2"D (241 mm x 121 mm x 51 mm)

Liberator
9 1/2"H x 6 7/8"W x 1"D (241 mm x 175 mm x 26 mm)

Commander
9 1/2"H x 4 3/4"W x 1 3/4"D (241 mm x 121 mm x 45 mm)
Other configurations available

Fortress
Faceplate: 12 1/2"H x 10"W x 1/8"D (318 mm x 254 mm x 3 mm)
Enclosure: 9 5/8"H x 6 1/2"W x 2 1/2"D (245 mm x 165 mm x 64 mm)
Custom sizes available

Telephone Line:

Analog, single line set compatible (CO lines and most PBX systems)
24 - 48 VDC line voltage; 30 mA minimum loop current

Wiring:

20 AWG shielded, twisted pair

Power:

Telephone line powered
9 VDC battery included for on-site programming

Standards:

FCC, IC and ETL (UL and CSA equivalent) approved