Description
Emergency Light Kit Details
This emergency light kit is ideal for replacing or upgrading COP-mounted emergency lighting systems. Designed for use with 12V emergency lighting applications, it is commonly used as a replacement for systems from manufacturers such as Monitor, PTL, KONE, National, EPCO, Adams, and Schindler. Compatibility should be verified prior to installation.
Built in the USA, this kit utilizes five super-bright LEDs and includes a 12V two-wire output screw terminal, backup battery, and built-in test switch.
The included 12VDC power supply accepts 100–240 VAC input. While powered, the battery pack is continuously charged and maintained for backup operation. A fully charged battery pack will provide a minimum of four hours of LED illumination during a power interruption.
After initial installation, please allow 12 hours for the battery pack to reach full charge.
Mounting Hardware Included:
(4) 5/8" Tall Threaded Spacers & Nuts - #6/32
(4) 5/8" Tall Threaded Spacers & Nuts - #8/32
901 Series Kit Phone Details
The K-Tech 901 Series Emergency Kit Phone can replace the electronics of nearly any AC-powered ADA elevator phone.
The circuit board has four 3M VHB stand-offs, meaning you can place it anywhere. The microphone, too, is self-adhering for a variety of placements. Each kit includes all the wiring and parts necessary for a fully functioning phone.
This fully ADA-compliant phone meets all safety standards by providing the built-in features necessary to promptly connect, identify, and respond to calls for assistance. The momentary press of the phone activation button puts it all into motion! An automatic dialer is provided to dial out to an auxiliary location.
Multiple phone numbers can be programmed that will sequentially cycle through if there is no answer or a busy signal is detected.